Brother DS-820W DS-920DW Scanner User Manual


 
48
6
6
Connecting in access point (AP) mode
You can connect your wireless device (computer, smartphone, tablet, etc.) to your scanner. Your scanner
itself can be the access point without going through any access point, and your wireless device can access
the scanned images stored on the SD card directly.
NOTE
If you have not set a Wi-Fi
®
network password, be sure to set up a network password in your web browser
first. For more information, see Setting a Wi-Fi
®
network password on page 51.
Without a Wi-Fi
®
network password, data on your SD card can be viewed and stolen by a third party.
If you forget your password, press the scanner’s RESET button to reset the password. For more
information, see Reset network settings on page 57.
Up to three wireless devices can connect to your scanner at a time.
a Slide the Wi-Fi
®
switch to ON.
Wait for about 40 seconds until the Wi-Fi
®
indicator turns from red to blue.
b Activate the Wi-Fi
®
function of your wireless device (computer, smartphone, tablet, etc.) to select the
scanner.
For more information, see the instructions provided with your wireless device.
Wi-Fi
®
Connection 6