Filter
Top Products
8 - 7 REMOTE FAX OPTIONS
95 Change the Fax Forwarding
or Paging settings
1 OFF If you hear one long beep, the change has
been accepted. If you hear three short beeps,
you cannot change it because the conditions
have not been met (for example, registering a
fax forwarding or paging number). You can
register your Fax Forwarding number by
entering 4. (See Changing your Fax
Forwarding number on page 8-9.) Once you
have registered the number, Fax Forwarding
will be set to
On
.
2 Fax Forwarding
3 Paging
4 Fax Forwarding number
6 Fax Storage ON You can turn
Fax Storage
to
On
(or
Off
after you have retrieved or erased all your
messages).
7 Fax Storage OFF
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to
receive stored fax message(s). (See page
8-9.)
3 Erase faxes from the
memory
If you hear one long beep, you can erase fax
messages from the memory.
97 Check the receiving status
(MFC-3320CN only)
1 Fax
You can check whether your machine has
received any faxes. If yes, you will hear one
long beep. If no, you will hear three short
beeps.
97 Check the receiving status
(FAX-1920CN only)
You can check whether your machine has
received any FAX or VOICE messages. If
yes, you will hear one long beep. If no, you will
hear three short beeps.
1 Fax
2 Voice
98 Change the Receive Mode
(MFC-3320CN only)
1 External TAD
If you hear one long beep, you can change
the Receive Mode.
2 Fax/Tel
3 Fax Only
Remote commands Operation details