Filter
Top Products
6 - 8 SETUP SEND
Fax Resolution
You can use the
Fax Resolution
key to change the setting
temporarily (for this fax only). Press
Fax Resolution
and
or
to select the setting you want, and then press
Menu/Set
.
—OR—
You can change the default setting.
1
If it is not illuminated in green, press (
Fax
).
2
Load your original. (See
Load originals
on page 2-1.)
3
Press
Menu/Set
,
2
,
2
,
2
.
4
Press or to select the
resolution you want.
Press
Menu/Set
.
5
Press
Stop/Exit
.
Manual and automatic fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause
, and then press
Black Start
or
Color Start
to try
again. If you want to make a second call to the last number dialed,
you can save time by pressing
Redial/Pause
and
Black Start
or
Color Start
.
Redial/Pause
only works if you dialed from the control panel.
If you are sending a fax automatically
and the line is busy, the
machine will automatically redial one time after five minutes.
Standard
Suitable for most typed originals.
Fine
Good for small print and transmits a little
slower than Standard resolution.
S. Fine
Good for small print or artwork and transmits
slower than Fine resolution.
Photo
Use when the original has varying shades of
gray. This has the slowest transmission
time.
2.Fax Resolution