Filter
Top Products
SETUP SEND 6 - 9
Color fax transmission
Your machine can send a color fax to machines that support this
feature.
However, color faxes cannot be stored in the memory, so Delayed
fax and Polling Transmit features are not available.
1
If it is not illuminated in green, press (
Fax
).
2
Load your original. (See
Load originals
on page 2-1
.)
3
Enter the fax number using the dial pad, One-Touch,
Speed-Dial or Search.
4
Press
Color Start
.
Dual Access (Not available for color faxes)
You can dial a number, and begin scanning the fax into memory—
even when the machine is sending from memory or receiving faxes.
The LCD shows the new job number and available memory.
When you send a color fax, the machine will send it in real time
(even if
Real Time TX
is set to
Off
).
Your machine normally uses Dual Access. However, to send a
color fax, the machine will send the original in real time (even if
Real Time TX
is
Off
).
The number of pages you can scan into the memory will vary
depending on the data that is printed on them.
If you get a
Out of Memory
message while scanning the first
page of a fax, press
Stop/Exit
to cancel scanning. If you get a
Out of Memory
message while scanning a subsequent page,
you can press
Black Start
to send the pages scanned so far,
or press
Stop/Exit
to cancel the operation.