Filter
Top Products
128
Out of Memory The machine’s memory is full. Fax sending or copy operation in
progress
Do one of the following:
Press Start to send or copy the scanned
pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See
Out of memory message on page 45 or
page 86.)
Print operation in process
Do one of the following:
Reduce print resolution. (See Advanced
tab in the Software User’s Guide on the
CD-ROM.)
Clear the faxes from the memory. (See
Out of memory message on page 86.)
Print Unable XX The machine has a mechanical
problem.
Disconnect the machine from the power for
several minutes, then reconnect it. (The
machine can be turned off for up to 60 hours
without losing faxes stored in the memory.
See Transferring your faxes or Fax Journal
report on page 130.)
Protected Device The protect switch of the USB
Flash memory drive is on.
Turn off the protect switch of the USB Flash
memory drive.
Rename the File There is already a file on the USB
Flash memory drive with the
same name as the file you are
trying to save.
Change the file name of the file on the USB
Flash memory drive or the file you are trying
to save.
Replace Parts
Drum
The drum unit is the end of its life. Replace the drum unit.
(See Replacing the drum unit on page 149.)
The drum unit counter was not
reset when a new drum was
installed.
1 Open the front cover, and then press
Clear/Back.
2 Press 1 to reset.
Replace Parts
Fuser Unit
It is time to replace the fuser unit. Call your Brother dealer to replace the fuser
unit.
Replace Parts
Laser Unit
It is time to replace the laser unit. Call your Brother dealer to replace the laser
unit.
Replace Parts
PF kit MP
It is time to replace the paper
feeding kit for the MP tray.
Call your Brother dealer to replace the
PF Kit MP.
Replace Parts
PF kit 1
It is time to replace the paper
feeding kit for Tray 1.
Call your Brother dealer to replace the
PF Kit 1.
Error Message Cause Action