Filter
Top Products
Chapter 4
30
Setting up the public user
mode 4
Public user mode restricts the functions that
are available for Public users. Public users do
not need to enter a password to access the
features made available through this setting.
You can set up one Public user.
a Press Menu, 1, 8, 1.
b Press a or b to choose Setup ID.
Press OK.
c Enter the administrator password.
Press OK.
d Press a or b to choose Public.
Press OK.
e Press a or b to choose Enable or
Disable for Fax Tx.
Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy, Scan,
USB Direct and PC Print.
When you have finished changing
setting, press a or b to choose Exit and
press OK.
f Press Stop/Exit.
Setting up restricted users 4
You can set up users with restrictions and a
password for functions that are available to
them. You can set up more advanced
restrictions, such as by page count or PC
user login name through Web Based
Management. (For more information, see the
Network User’s Guide on the CD-ROM.) You
can set up to 25 restricted users with
restrictions and a password.
a Press Menu, 1, 8, 1.
b Press a or b to choose Setup ID.
Press OK.
c Enter the administrator password.
Press OK.
d Press a or b to choose User01.
Press OK.
e Use the numeric keys to enter the user
name. (See Entering text on page 180.)
Press OK.
f Enter a four-digit password for the user.
Press OK.
g Press a or b to choose Enable or
Disable for Fax Tx.
Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy, Scan,
USB Direct and PC Print.
When you have finished changing
setting, press a or b to choose Exit and
press OK.
h Repeat steps d to g for entering each
additional user and password.
i Press Stop/Exit.
Note
You cannot use the same name as
another user’s name.