Filter
Top Products
Troubleshooting and routine maintenance
153
C
Reset C
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address infromation.
2 Address & Fax
You can reset your address book,
programmed fax jobs in the memory (such
as Polled TX and Delayed Fax), incoming
and outgoing faxes in the memory, and
the following fax settings:
Address Book
(One-Touch Dial, Speed-Dial and
Setup Groups)
Programmed fax jobs in the memory
(Polled Transmit, Delayed Polling,
Secure Polling, Delayed Fax and
Delayed Batch)
Station ID
(Name and Number)
Coverpage Msg
(Comments)
Remote Fax Option
(Remote Access Code, Fax Storage,
Fax Forwarding and PC-Fax)
Report settings
(Transmission Verification Report, Tel
Index List and Fax Journal)
Setting Lock password
3 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.
Note
Unplug the interface cable before you
choose Network or All Settings.
How to Reset C
a Press Menu, 0, 7.
b Press a or b to choose the reset you
want.
Press OK.
c Press a or b to choose 1.Reset or
2.Exit.
Press OK.
d If you choose 1.Reset in step c, you
will be asked to reboot the machine.
Press a or b to choose 1.Yes or 2.No
Press OK.
If choose 1.Yes, the machine will begin
the Restart.
Note
You can also reset the Nerwork settings
by pressng Menu, 7, 0.