Brother MFC 7300C All in One Printer User Manual


 
4 - 2
ON-SCREEN PROGRAMMING
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions about
how to proceed. The display you’ll probably see most often is shown below. It
appears when you place an original in the ADF to tell you that you can dial a
number and send a fax, or you can make a copy.
Function Selection Table
You can probably perform most of these programming settings without the
Owner’s Manual. To help you understand the function selections, options and
settings that are found in the MFC programs, use the Function Selection Table
below.
1. Fax Functions
1. INITIAL SETUP
Function Description Factory Setting Page
1. DATE/TIME
Enter date and time for the
LCD display and heading on
fax transmissions.
2001 1/1 00:00 5-1
2. STATION ID
Program your name, fax
number and telephone
number to appear on each
transmitted page.
5-1
3. BEEPER
Adjust volume level of
beeper.
LOW 5-3
4. VOLUME AMPLIFY
For the hearing-impaired,
you can set the volume to the
VOL AMPLIFY:ON setting
on a permanent or temporary
basis.
OFF 5-5
5. AUTO DAYLIGHT
Changes for Daylight
Savings Time automatically.
OFF 5-6
6. TONE/PULSE
(For Canada only)
Selects dialing mode. TONE 5-3
7. LOCAL
LANGUAGE
(For Canada only)
Allows you to change the
LCD Language to French.
ENGLISH See
French
Manual
FAX: NO. & START
COPY: PRESS COPY