Brother MFC 7300C All in One Printer User Manual


 
8 - 1
AUTO DIAL NUMBERS AND DIALING OPTIONS
8
8
Auto Dial Numbers
and Dialing Options
Storing Numbers for Easy Dialing
You can set up your MFC to do three types of easy dialing: One Touch, Speed
Dial and Groups for Broadcasting faxes.
Storing One Touch Dial Numbers
You can store 8 fax/phone numbers that you can dial by pressing one key (and
Start). You also can store names with these numbers. When you press a One
Touch dial location, the screen displays the name or number as the call is dialed.
(See
One Touch Dialing, page 8-5.)
One Touch keys are not the dial pad keys. They are the 4 keys (numbers 1–4)
located underneath the dial pad.
Numbers 5-8 are accessed by holding down shift while you press the
appropriate One Touch key.
1
Press Function, 1, 5, 1.
2
Press the One Touch key where you want to store a number. To store a number
in locations 5–8, press Shift, then press a key.
(One-Touch key 1 is pre-programmed for Brother fax-back system, USA only.
You can override it if you wish.) The screen displays the location you selected.
3
Enter a number (up to 20 digits) and press Set. If you want to enter a pause in
the dialing sequence (for example, to wait for an “outside line” ), press
Redial/Pause as you’re entering digits. Pressing Redial/Pause enters a 3.5
second pause when the number is dialed, and a dash appears on the screen.
4
Use the dial pad to enter the name (up to
15 characters) and press Set. You can
use the chart on page 5-2 to help you
enter letters—OR—To store the number without a name, press Set.
5
Press or to select the type of number and press Set.
If you loose electrical power, auto dial numbers in memory will not be lost.
FAX a fax only number
TEL a telephone (voice) number
FAX/TEL both a fax and telephone (voice) number
NAME: