Filter
Top Products
Loading paper
27
2
Printing on thick paper, labels and
envelopes from the MP tray
2
When the back cover (face-up output tray) is
pulled down, the machine has a straight
paper path from the MP tray through to the
back of the machine. Use this paper feed and
output method when you want to print on thick
paper, labels or envelopes. (For the
recommended paper to use, see Acceptable
paper and other print media on page 34 and
Envelopes on page 37.)
Before loading, press the corners and sides
of the envelopes to make them as flat as
possible.
a Open the back cover (face-up output
tray).
b (For printing envelopes only)
Pull down the two gray levers, one on
the left side and one on the right side,
toward you as shown in the illustration
below.
c Open the MP tray and lower it gently.