Filter
Top Products
Loading paper
35
2
Paper Tray Capacity 2
1
Folio size is 8.5 in. 13 in. (215.9 mm 330.2 mm).
2
Load only one sheet of Glossy in the MP tray.
Recommended paper specifications 2
The following paper specifications are appropriate for this machine.
Use plain paper that is appropriate for laser/LED machines to make copies.
Use paper that is 20 to 24 lb (75 to 90 g/m
2
).
Use long grain paper with a neutral Ph value, and a moisture content of approximately 5%.
This machine can use recycled paper that meets DIN 19309 specifications.
Paper size Paper types No. of sheets
Multi-purpose tray
(MP tray)
Width: 3.0 to 8.5 in.
(76.2 to 215.9 mm)
Length: 5 to 14 in.
(127 to 355.6 mm)
Plain Paper, Thin Paper,
Thick Paper,
Thicker Paper,
Recycled Paper,
Bond Paper, Labels,
Envelopes, Env. Thin,
Env.Thick and Glossy
Paper
2
up to 50 sheets
20 lb (80 g/m
2
)
3 Envelopes
1 Glossy paper
Standard paper tray
(Tray 1)
Letter, A4, Legal,
B5 (JIS), Executive, A5,
A5 (Long Edge), A6,
Folio
1
Plain Paper, Thin Paper
and Recycled Paper
up to 250 sheets
20 lb (80 g/m
2
)
Optional lower tray
(Tray 2)
Letter, A4, Legal,
B5 (JIS), Executive, A5,
Folio
1
Plain Paper, Thin Paper
and Recycled Paper
up to 500 sheets
20 lb (80 g/m
2
)
Basis Weight
20-24 lb (75-90 g/m
2
)
Thickness 80-110 m
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain Direction Long grain
Volume Resistivity
10e
9
-10e
11
ohm
Surface Resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash Content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%