Filter
Top Products
10
1
Use the network cable to connect the
PS-9000 to the Ethernet hub.
2
Connect the AC adapter to the PS-9000,
and then plug the power cable of the
P-touch and PS-9000 into the electrical
outlet.
3
Use the USB cable to connect the
PS-9000 to the P-touch. (PS-9000: Type A
connector; P-touch: Type B connector)
4
Turn on the P-touch.
Note
● The USB cable has two different types of
connectors. Be sure to insert the correct
type of connector into the correct port.
■ USB Cable Connectors
Type A
Type B
Caution
● Using an AC adapter other than the one
supplied with PS-9000 may result in
damage.
● Do not connect devices other than a
P-touch to the PS-9000 USB port.
● Wait more than 2 seconds between
connecting and disconnecting the USB
cable.
● Do not disconnect the USB cable while
printing.
Note
● The shape of the power cord depends on your model.
P-touch
PS-9000
Ethernet HUB