Filter
Top Products
16
4
Select the PS-9000 to be set up, and then
click [Next].
• If the product is not displayed in the
list, click [Search].
• Alternatively, you can type in the
Ethernet address of the product that you
want to set up.
• If you want to reset the product to its
factory default settings, click [Initialize]
and follow the instructions.
5
Specify the IP address.
• If “Assign an IP address” is selected
(recommended)
→In the following dialog box that
appears, type in the IP address,
subnet mask and default gateway.
Consult your network administrator
for the appropriate settings.
• If “Obtain an IP address automatically”
is selected
→In an environment with a DHCP/
BOOTP server, the IP address of
the PS-9000 is automatically
assigned.
Caution
● After setup, the IP address may
change when the unit is turned off,
then turned on again. In that case, the
PS-9000 must be set again and the
printing software must be reinstalled.