Filter
Top Products
111
Appendix
■ Cleaning the print head and head roller
If the print head is not cleaned by the self-
cleaning function, follow the following
procedures to clean the PT-9500PC.
1
Turn off the PT-9500PC.
2
Press the cover release button and open
the tape compartment cover.
3
Remove the tape cassette.
4
Use a cotton swab to clean the print head
and head roller.
"Print head
"Head roller
5
Install the removed tape cassette, and
then close the tape compartment cover.
Cotton swab
Print head
Note
● The PT-9500PC contains a cutter to cut
printed labels. Take special care not to
touch the cutter when cleaning the
PT-9500PC.
● The print head is very hot during use and
immediately after use. Do not clean the
PT-9500PC immediately after printing
labels.
Print head
Cotton swab