Cabletron Systems 2E49-27R Switch User Manual


 
FLASH Download Screen
2E48-27R/2E49-27R User’s Guide 5-57
Section 5.16.2 describes how to download using TFTP. Section 5.16.3
describes how to download using Runtime.
Reboot After Download (Modifiable only when RUNTIME is chosen.)
This field notifies the user that the 2E4X-27R will reboot after the
download is complete. If a Runtime Download is performed, this field
toggles between YES and NO. If YES is selected, the device reboots after
the download is completed. If NO is selected, the device continues using
the existing firmware image and stores the new firmware image in
FLASH memory. When the device is reset or during the next power-up,
the device boots from FLASH memory using the new image.
TFTP Gateway IP Addr (Modifiable)
This field shows the IP address of the TFTP gateway server defined on the
General Configuration screen in Section 5.7.4, Setting the TFTP Gateway
IP Address.
Last Image Server IP (Read-only)
This field shows the IP address of the server used for the previous FLASH
Download.
Last Image File Name (Read-only)
This field shows the complete path and file name of the last image
downloaded to FLASH. If TFTP or RUNTIME is selected as the
download method (see Figure 5-24), the following two additional fields
display:
Download Server IP (Selectable)
The IP address of the TFTP server to be used for the FLASH
download is entered in this field.
Download File Name (Selectable)
The complete TFTP Server path and file name of the new image is
entered in this field.