Filter
Top Products
2E48-27R/2E49-27R User’s Guide 5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
Local Management. It also explains how to use the Local Management
screens and commands.
5.1 OVERVIEW
Local Management for the 2E4X-27R consists of a series of screens that
allow the management of the 2E4X-27R. The screens allow the user to do
the following tasks:
• Assign IP address and subnet mask.
• Select a default gateway.
• Control access by establishing community names.
• Download a new operation firmware image.
• Designate which Network Management Workstations receive SNMP
traps from the device.
• View switch, interface, and RMON statistics.
• Configure ports.
• Control the number of receive broadcasts that are switched out to the
other interfaces.
• Clear NVRAM.
There are three ways to access Local Management:
• Locally using a VT type terminal connected to the COM port.
• Remotely using a VT type terminal connected through a modem.
• In-band through a Telnet connection.