Filter
Top Products
RMON Statistics Screen
2E48-27R/2E49-27R User’s Guide 5-75
The following briefly defines each field of the RMON Statistics screen:
RMON Index (Read-only)
This field displays the current Ethernet interface for which statistics are
being shown. The 2E4X-27R has an embedded RMON agent that gathers
statistics for each interface on the device.
Data Source (Read-only)
This field displays the source of the statistics data that is currently being
displayed on the screen. Figure 5-30 shows that the data source for this
RMON index is Port 1 by displaying the name IfIndex.1. If the screen was
displaying RMON statistics for Port 4, the name displayed would be
IfIndex.4.
Owner (Read-only)
This field displays the name of the entity that configured this entry.
Status (Read-only)
The Status field displays the current operating status of the displayed
interface. This field displays “valid” or “invalid”.
Drop Events (Read-only)
This field displays the total number of times that the RMON agent was
forced to discard frames due to the lack of available switch resources.
Collisions (Read-only)
This field displays the total number of collisions that have occurred on
this interface.
Broadcast Pkts (Read-only)
The Broadcast Pkts field displays the total number of good frames that
were directed to the broadcast address. The value of this field does not
include multicast frames.
NOTE
The Drop Events field does not display the number of frames
dropped, it only displays the number of times that the RMON
agent was forced to discard frames.