Cabletron Systems 2E49-27R Switch User Manual


 
General Configuration Screen
2E48-27R/2E49-27R User’s Guide 5-17
5.7 GENERAL CONFIGURATION SCREEN
The General Configuration screen, Figure 5-9, allows the user to set the
system date and time, IP address and subnet mask, the default gateway,
the TFTP gateway IP address, and the operational mode. Also, clear the
NVRAM, set the screen refresh time, the screen lockout time, the IP
fragmentation, the COM port configuration, and monitor the total time
(uptime) that the device has been running.
To access the General Configuration screen from the Device
Configuration Menu screen, use the arrow keys to highlight the
GENERAL CONFIGURATION menu item and press ENTER. The
General Configuration screen displays.
Figure 5-9 General Configuration Screen
The following briefly explains each General Configuration screen field:
MAC Address (Read-Only)
Displays the base physical address of the 2E4X-27R.
Firmware Revision: XX.XX.XX
General Configuration
23142_15
BOOTPROM Revision: XX.XX.XX
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
TFTP Gateway IP Addr:
Device Date:
Device Time:
Screen Refresh Time:
Screen Lockout Time:
Com: [ENABLED] Application: [LM]
Clear NVRAM [NO]
Device Uptime XX D XX H XX M
Device Type: 2E48-27R
IP Fragmentation [ENABLED]
Operational Mode: [802.1D SWITCHING]
00-00-ID-00-00-00
0.0.0.0
255.255.0.0
NONE DEFINED
0.0.0.0
2E48-27R LOCAL MANAGEMENT
Event Message Line
RETURNSAVE
10/11/97
14:23:00
30 sec.
15 min.
EXIT