Cabletron Systems 2E49-27R Switch User Manual


 
Chapter 3: Installation
3-2 2E48-27R/2E49-27R User’s Guide
2. Verify the contents of the carton as listed in Table 3-1.
3. Remove the black and amber tape seal on the non-conductive bag to
remove the 2E4X-27R.
4. Perform a visual inspection of the device for any signs of physical
damage, and contact the Cabletron Systems Global Call Center if there
are any signs of damage. Refer to Section 1.5 for details.
3.2 INSTALLING OPTIONS
If the 2E4X-27R is to be installed with an optional Fast Ethernet Interface
Module, refer to Appendix C for installation instructions. The installation
instructions for the HSIMs are in the associated HSIM user’s guide.
Table 3-1 Contents of 2E4X-27R Carton
Item Quantity
2E4X-27R 1
Antistatic wrist strap 1
Console Cable Kit 1
Rackmount Kit 1
Strain-Relief Bracket 1
Manual Accessory Kit 1
Power Cord (2E48-27R or 2E49-27R) 2
NOTE
Install any optional equipment before proceeding to
Section 3.3.