Filter
Top Products
General Configuration Screen
2E48-27R/2E49-27R User’s Guide 5-29
Figure 5-14 COM Port Warning Screen
3. Use the arrow keys to highlight YES. Press ENTER.
4. If the port was ENABLED, the message “SAVED OK” appears, and
the edits are saved. If the port was DISABLED, use the arrow keys to
highlight SAVE at the bottom of the screen, then press ENTER.
NOTE
Exiting without saving causes the message “NOT SAVED --
PRESS SAVE TO KEEP CHANGES” to appear. Exiting without
saving causes all edits to be lost.
WARNING
174252
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
YES
NO