Cabletron Systems 2H22 Switch User Manual


 
Index
Index-2 Local Management Supplement
H
Hierarchy
802.1D switching mode 1-3
802.1Q switching mode 1-4
High Speed Interface screen
advertised ability 1-23
configuring an FE-100FX 1-23
configuring an FE-100TX 1-24
current operational mode 1-22
desired operational mode 1-22
link status 1-22
port type 1-22
setting the FE-100FX 1-24
setting the FE-100TX 1-24
I
IGMP/VLAN Configuration screen
Default for new VLANS 1-49
IGMP State 1-49
IGMP Version 1-47
Interface Robustness 1-48
Last Member Query Interval 1-48
Querier Address 1-48
Querier Expire Time 1-48
Querier Uptime 1-48
Query Interval 1-47
Query Response Time 1-48
VLAN ID 1-49
M
MIB Navigator 5-1
Module Level Security (2Hxx)
setting of 3-9
N
Port Redirect Configuration screen
destination port 1-29
source port 1-29
VLAN Redirect Configuration screen
destination port 1-33
source VLAN 1-33
Network Tools 5-1
built-in commands
cdp 5-3
O
Operating Mode On Repeater
Ports (2Hxx)
setting of 3-6
Operational mode
setting of 1-18
P
Password screen 1-2
Port Level Security (2Exx)
setting of 2-8
Port Level Security Configuration
screen (2Exx)
action on intruder 2-7
address 2-7
interface # 2-8
port 2-6
security state 2-6
Port Operating Mode (2Hxx)
setting of 3-5
Port Priority Configuration screen
port # 1-53
priority 1-53
set all switch port’s flow
control 1-53
Port Redirect Configuration screen
destination port 1-28
frame format (read only) 1-29, 1-33
frame format (selectable) 1-29
redirect errors 1-29, 1-33
redirect errors (toggle) 1-29
source port
1-28
status 1-29
R
Repeater Level Security (2Exx)
setting the 2-4
Repeater Level Security
Configuration screen (2Exx)
action on intruder 2-4
interface 2-3
security state 2-3