Filter
Top Products
Advanced Port Priority Configuration Screen
Local Management Supplement 1-57
1.22.1 Setting the TX Mapping Queues
To set the TX queue for frames with a particular priority, proceed as
follows:
1. Use the arrow keys to highlight the Port # field.
2. Type in the number of the port to which the TX queue setting will be
applied.
3. Use the arrow keys to highlight the Default Priority field. The screen
refreshes and displays the current settings of the port in the Port #
field.
4. Use the arrow keys to highlight the TX Queue field for the particular
frame priority.
5. Press the SPACE bar to step to the appropriate value, 0 or 1. The 0
selection is the lowest level TX queue.
6. If more than one TX queue is to be changed, repeat steps 4 and 5 until
all the appropriate TX queue settings are changed.
7. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
8. Press ENTER. The message “SAVED OK” displays and the setting is
saved.
1.22.2 Setting the TX Regeneration Priorities
To set the TX priority for frames with a particular RX priority, proceed as
follows:
1. Use the arrow keys to highlight the Port # field.
2. Type in the number of the port to which the TX priority setting will be
applied.
3. Use the arrow keys to highlight the Default Priority field at the
bottom of the screen. The screen refreshes and displays the current
settings of the port in the Port # field.
4. Use the arrow keys to highlight the TX Priority field for the particular
RX frame priority.