Filter
Top Products
Repeater Statistics Screen
2H23-50R/2H33-37R User’s Guide 5-95
Admin Status (Read-only)
Indicates if the network or port is enabled (Enabled) or disabled
(Disabled).
NETWORK # (Command)
This command is used to select a particular Network to view its statistics.
When the Network is selected the statistics are also displayed for the first
port in the Network under Port #. For details, refer to Section 5.26.1
PORT # (Command)
This command is used to select a particular Port to view its statistics and
those of its associated Network. For details, refer to Section 5.26.2.
CLEAR COUNTERS (Command)
This command sets all statistics counters to zero. For details on how to
use this command, refer to Section 5.26.3.
5.26.1 Displaying Network Statistics
To display the statistics of any Network, proceed as follows:
1. Use the arrow keys to highlight the NETWORK # command field at
the bottom of the screen.
2. Press the SPACE bar to increment or press the BACKSPACE key to
decrement the port number.
3. Press ENTER (the NETWORK #, the first PORT # of the Network,
and the associated statistics do not display until ENTER is pressed).
5.26.2 Displaying Network Port Statistics
To display the statistics for any repeater port, proceed as follows:
1. Use the arrow keys to highlight the PORT # command field at the
bottom of the screen.
2. Press the SPACE bar to increment or press the BACKSPACE key to
decrement the port number.
3. Press ENTER (the PORT #, the NETWORK # of the associated
network, and the statistics do not change until ENTER is pressed).