Cabletron Systems 2H23-50R Switch User Manual


 
Chapter 5: Local Management
5-44 2H23-50R/2H33-37R User’s Guide
The following briefly defines each selectable item of the Device Specific
Configuration Menu screen:
SYSTEM RESOURCES
The System Resources screen displays the amount of FLASH memory,
DRAM and NVRAM installed, indicates the amount of available memory
and provides information on 2H23-50R or 2H33-37R operation. For
details, refer to Section 5.12.
HIGH SPEED INTERFACE CONFIGURATION
The High Speed Interface Configuration screen indicates which Fast
Ethernet Interface Modules are installed in slots 5 and 6 of the 2H23-50R,
their current operating mode, and if the ports are linked. This screen also
allows the Auto-Negotiation and Advertised Ability features to be enabled
or disabled. For details, refer to Section 5.13.
The High Speed Interface Configuration screen for the 2H33-37R enables
management of an installed HSIM. For details, refer to the applicable
HSIM user’s guide.
FLASH DOWNLOAD
The FLASH Download screen enables the user to force the 2H23-50R or
2H33-37R to download a new image file from a TFTP server to its
FLASH memory. For details, refer to Section 5.14.
PORT REDIRECT FUNCTION
The Port Redirect Function screen enables the user to redirect traffic from
one or multiple switch ports to a specific destination switch port. For
details, refer to Section 5.15.
BROADCAST SUPPRESSION
The Broadcast Suppression screen enables the user to set a desired limit
of received broadcast frames that are forwarded per port per second. For
details, refer to Section 5.16.
802.1Q VLAN CONFIGURATION
This menu item will only display if the 2H23-50R or 2H33-37R has been
configured to operate as an 802.1Q switch as described in Section 5.7.9,
Setting the Operational Mode. When selected, this menu item opens the
VLAN Main Menu screen. For details about the VLAN Local
Management screens, refer to the Cabletron Systems
Port Based VLAN User’s Guide.