Filter
Top Products
2H23-50R/2H33-37R User’s Guide 5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
Local Management. It also explains how to use the Local Management
screens and commands.
5.1 OVERVIEW
Local Management consists of a series of screens that allow the
management of the 2H23-50R or 2H33-37R. The screens allow the user
to do the following tasks:
• Assign IP address and subnet mask.
• Select a default gateway.
• Control access by establishing community names.
• Download a new operation firmware image.
• Designate which Network Management Workstations receive SNMP
traps from the device.
• View bridge and port statistics.
• Configure switch operations (802.1D, 802.1Q, or SecureFast
Switching).
• Control the number of receive broadcasts that are switched out to the
other interfaces.
• Clear NVRAM.
There are three ways to access Local Management:
• Locally using a VT type terminal connected to the COM port of the
2H23-50R or 2H33-37R.
• Remotely using a VT type terminal connected through a modem.
• In-band through a Telnet connection.