Filter
Top Products
Chapter 5: Local Management
5-106 2H23-50R/2H33-37R User’s Guide
atm_stp_state:
Syntax: atm_stp_state [STATE]
Description: The atm_stp_state command allows the user to
enable, disable, or check the status of the
Spanning Tree Algorithm on all ATM
interfaces. The user must specify the STATE
option as enable, disable, or status. The STATE
field is mandatory.
Options: enable, disable, status
Example:
NOTE
The atm_stp_state command is only available if an
HSIM-A6DP is installed in the device (e.g., 6E13X-25). This
command allows the user to enable, disable, or check the
current status of the Spanning Tree Algorithm on all ATM
interfaces.
-> atm_stp_state status
Atm Stp is Enabled
-> atm_stp_state disable
-> atm_stp_state enable
2314-79