Filter
Top Products
Device Events and Alarms
Event and Alarm Messages 3Com PortSwitch Hubs
4-6 Management Module Guide
CsEvFormat/Event00ea0031
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a card
has been removed from the service {I 1}.
(event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0032
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a
physical entity of service id {I 1} has
changed state to {T estate 3}. (event
[{e}])
No Probable cause message.
CsEvFormat/Event00ea0033
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that the
power requirements of the entities in
the chassis exceed the power capacity of
the power supplies. (event [{e}])
CsPCause/Prob00ea0033
The combination of the power requirements
of all the entities in the chassis has been
calculated to exceed the power capacity of
the power supplies present in the chassis.
CsEvFormat/Event00ea0034
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that the
managemant card temperature sensing
device is reporting DANGER. (event
[{e}])
CsPCause/Prob00ea0034
Mounted on the Management card is a
temperature sensing device. This device
provides three output levels: OK, WARM
and DANGER. DANGER causes a trap to
be generated.
CsEvFormat/Event00ea0035
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that the
status input {I 2} of name {S 3} has
changed state to {I 1} (1=Open,
2=Closed). (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0036
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that port {I
2} has learned a staion address {H 3}.
(event [{e}])
No Probable cause message.
Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause
Message