Cabletron Systems 3Com PortSwitch Hub Switch User Manual


 
9032295 E2 Event and Alarm Messages
4-7
Device Events and Alarms
CsEvFormat/Event00ea0037
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} has detected a security violation.
(event [{e}])
CsPCause/Prob00ea0037
This trap indicates that this port has
detected security violation.
CsEvFormat/Event00ea0038
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} has had its partion state changed
to {I 1} (1=Partitioned,
2=UnPartitioned). (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0039
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} has had its link state changed to {I
1} (1=Present, 2=Absent). (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0040
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} has had its Admin state changed to
{I 1} (1=Enabled, 2=Disabled) by a
gauge. (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0041
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} has had its Bandwith Used
threshold {I 3} exceeded. The Bandwith
used is {I 1} (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0042
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} has had its Errors/10000 packets
threshold {I 3} exceeded. The Errors/
10000 packets is {I 1} (event [{e}])
No Probable cause message.
Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause
Message