Filter
Top Products
Security Application
Local SNMP Application
Application Views 3Com PortSwitch Hubs
5-8 Management Module Guide
Local SNMP Application
This application provides access to the Local SNMP view, allowing you to set
SNMP Traps for this device. The model type for this application is
3ComSnmpApp2.
Local SNMP View
This view contains the following:
Next Free Index
Displays the index value for the next table entry.
Accesses the Add SNMP Table Entry view, which allows you to set the
following values for a new entry.
SNMP Trap Table
This table stores the destination addresses of SNMP managers that wish to
receive traps from this device. Double-clicking an entry in this table displays
the SNMP Trap Table Entry view in which you can update values.
Index
Displays the index for this entry.
Destination
Displays the network address of the device to which the SNMP traps will be
sent.
Protocol
Displays the transport protocol to use when sending the trap. Possible values
are IP, IPX, and None.
Community
Displays the SNMP community string to be used when sending the trap. You
can update this field.
Add Entry