Filter
Top Products
The 9A128-01 Module View
2-6 Viewing Module Information
• ATM Connections, which launches the window that allows you to view and
configure Permanent Virtual Circuits (PVCs) for the 9A128-01’s front panel
ATM interfaces. For more information about configuring PVCs, see Chapter 3,
ATM Configuration.
• Power Supply... which launches the Power Supply window that displays
information about each power supply and it’s associated cooling fan in your
MMAC-Plus chassis. You can also control the operation of the cooling fan from
this window; see the Cabletron Systems Using MMAC-Plus Remote
Management Guide for more information.
• Chassis Power Detail
... which launches the Chassis Power Detail window that
displays information about the power subsystem of the MMAC-Plus chassis;
see the Cabletron Systems Using MMAC-Plus Remote Management Guide for
more information.
• Environment View... which launches the Environment View window which
provides information of the environmental conditions associated with the
modules in the MMAC-Plus chassis; see the Cabletron Systems Using
MMAC-Plus Remote Management Guide for more information.
• FNB Configuration (Non-Mux)... which launches the FNB Configuration
window that displays and allows you to configure your FNB’s current
configuration; see the Cabletron Systems Using MMAC-Plus Remote
Management Guide for more information.
• Bridge Status..., which opens a window that provides an overview of bridging
information for each port, and allows you to access all other bridge-related
options. Refer to Chapter 5, Bridging, for more information.
• Find Source Address..., which opens a window that allows you to search the
9A128-01’s 802.1d Filtering Database to determine which bridging interface a
specified source MAC address is communicating through. If the MAC address
is detected as communicating through the bridge, the port display will flash to
indicate the bridge interface of interest.
• Exit, which closes the 9A128-01 Module View window.
The Port Status Menu
The Port Status menu allows you to select the status information that will be
displayed in the Bridge and FDDI port text boxes in the Module View window:
• Bridge allows you to select one of five status type displays for the bridge ports:
I/F Mapping, I/F Speed, I/F Type, Bridge Port State, or Bridge Mapping.
NOTE
The next four menu options will appear depending on the configuration and services
available in the MMAC-Plus chassis that this module is inserted within; for more
information on management operations directly related to the monitoring and control of
the MMAC-Plus Chassis, see the Cabletron Systems Using MMAC-Plus Remote
Management Guide.