Filter
Top Products
Viewing Module Information 2-17
The 9A128-01 Module View
management backplane; 100 Mbps for FDDI; or 155 Mbps for ATM). Load is
further defined by the following parameters.
In Octets The number of bytes received by this interface, expressed
as a percentage of the theoretical maximum load.
Out Octets The number of bytes transmitted by this interface,
expressed as a percentage of the theoretical maximum
load.
Rate
The count for the selected statistic during the last poll interval. The available
parameters are the same as those provided for Raw Counts. Refer to the Raw
Counts section, above, for a complete description of each parameter.
Interface Statistics Window
The Interface Statistics window (Figure 2-9) provides MIB-II interface statistical
information — including counts for both transmit and receive packets, and error
and buffering information — for each available port interface. Color-coded pie
charts also let you graphically view statistics for both received and transmitted
Unicast, Non-Unicast, Discarded, and Error packets.
To open the Interface Statistics window:
1. In the I/F Summary window, click to select the interface for which you’d like to
view more detailed statistics.
2. Click on . The appropriate Interface Statistics window, Figure 2-9, will
appear.
Figure 2-9. Interface Statistics Window