Filter
Top Products
Filtering Database 5-27
Bridging
2. In the Filter Address field, type in the address (Hex format) for which you
desire bridging. Be sure to add “-” as a separator between each byte in the
address.
3. In the Receive Port field, type in the port at which the address must be
detected for bridging to take place. If you enter a value of 0 in this field, the
Receive Port is considered promiscuous (i.e., any port), and will be
designated by an * in the Address Entry panel.
4. Click on OK.
5. Specify the Port Filtering action on the address entry as described in the
previous section.
To delete an address:
1. Click to highlight the address entry in the Address Entry panel that you wish to
delete from the filtering database.
2. Click on Delete.
Clearing All Permanent, Static, or Dynamic Entries
To erase all Permanent, Static, or Dynamic entries from the Filtering Database,
click on the associated button in the upper portion of the window.