Filter
Top Products
ATM Configuration
3-2 Accessing the ATM Connections Window
Figure 3-1. The Current ATM Connections Window
The Current ATM Connections window provides the following information about
the device’s ATM connections:
Connection Data
The Connection Data fields provide the following information about each ATM
interface available on the device:
I/F Displays the index number assigned to each ATM
interface present on the selected module. The 9A128-01
has a single ATM interface, indexed 4.
Maximum Connections Displays the maximum number of connections allowed
by current device firmware.
Current Configured Displays the number of Permanent Virtual Circuits, or
PVCs, currently configured.
TIP
The 9A128-01 supports a total of four interfaces. For more detailed information about the
interfaces present on each module and their index number assignment, see Viewing I/F
Summary Information in Chapter 2.
NOTE
Connection Data will not be available for the 9A128-01’s ATM interface.
Due to a firmware
anomaly,
Connection Data will
not be available in
this window for the
9A128. Also, you will
not be able to set any
new connections or
modify any existing
connections from this
window.