Filter
Top Products
Chapter 5: Local Management
5-44 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
1. Use the arrow keys to highlight the Module Date field.
2. Enter the date in an MM/DD/YYYY format.
3. Press ENTER to set the system calendar to the date in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the date entered is a valid format, the Event Message Line at the top of
the screen displays “SAVED OK”. If the entry is not valid, Local
Management does not alter the current value, but it does refresh the
Module Date field with the previous value.
5.15.6 Setting the Module Time
To set the module clock, perform the following steps:
1. Use the arrow keys to highlight the Module Time field.
2. Enter the time in an 24-hour format, HH:MM:SS.
If the DLM6C-AA chassis has been assigned a chassis date, it
is not necessary to assign a module date to the DLE2X-MA
and DLE3X-MA. All installed modules recognize the chassis
date of the DLM6C-AA.
It is not necessary to add separators between month, day, and
year numbers. For example, to set the date to 03/17/1997, type
“03171997” in the Module Date field.
If the DLM6C-AA chassis has been assigned a chassis time, it
is not necessary to assign a module time to the DLE2X-MA and
DLE3X-MA. All installed modules recognize the chassis time of
the DLM6C-AA.
When entering the time in the system time field, separators
between hours, minutes, and seconds do not need to be added
as long as each entry uses two numeric characters. For
example, to set the time to 6:45
A
.
M
., type “064500” in the
Module Time field.