Filter
Top Products
DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide 4-1
CHAPTER 4
TROUBLESHOOTING
This chapter provides information concerning the following:
• Using the LANVIEW diagnostic and status monitoring system
• Troubleshooting network and module operational problems
• Using the RESET button
4.1 USING LANVIEW
The DLE2X-MA and DLE3X-MA use a built-in visual diagnostic and
status monitoring system called LANVIEW. The LANVIEW LEDs
(Figure 4-1) allow quick observation of the network status to aid in
diagnosing network problems. Refer to Table 4-1 for a description of the
LEDs.
For a functional description of the LANVIEW LED on the optional Fast
Ethernet Interface Module (DELTX-UI), refer to Section 4.2.
All LEDs for the High Speed Interface Module (HSIM) are located on the
HSIM and are described in the associated HSIM user’s guide.
The four interface modules covered in this manual all share the
same LANVIEW LEDs.
The terms
flashing
,
blinking
, and
solid
used in the LED
definition tables of this chapter indicate the following:
Flashing
indicates an irregular LED pulse.
Blinking
indicates a steady LED pulse.
Solid
indicates a steady LED light. No pulsing.