Cabletron Systems DLE32-MA Switch User Manual


 
Chapter 1: Introduction
1-6 DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide
Designate workstations to receive SNMP traps from the DLE2X-MA
and DLE3X-MA interface modules and the DLM6C-AA chassis.
Configure module specific SNMP MIB objects including the IETF
Bridge MIB objects.
Chapter 5 provides detailed information about Local Management of the
DLE2X-MA and DLE3X-MA, the optional Fast Ethernet Interface
Modules and the DLM6C-AA chassis. The associated High Speed
Interface Module user’s guide provides detailed information about Local
Management of the applicable HSIM.
1.2 OPTIONAL FEATURES
Options for the DLE2X-MA and DLE3X-MA are Fast Ethernet Interface
Modules and High Speed Interface Modules, which add remote uplink
capability.
Digital Equipment Corporation provides Fast Ethernet Interface Modules
for the DLE2X-MA to support uplinks to 100 Mbps Ethernet backbones
or high speed connections to local servers. The Fast Ethernet Interface
Modules are listed in Table 1-1.
Digital Equipment Corporation provides High Speed Interface Modules
for the DLE3X-MA to provide for additional connectivity to other high
speed networking technologies such as ATM, WANs and FDDI. The
HSIMs available for the DLE3X-MA are listed in the Release Notes.
Table 1-1 Fast Ethernet Interface Modules
P/N Description Application
DELTX-UI
Uses RJ45
connector
Supports Shielded Twisted Pair (STP) and
Category 5 Unshielded Twisted Pair (UTP)
cabling.
DELFX-UI
Uses SC
connector
Supports multimode fiber optic cabling.
DELF3-UI
Uses SC
connector
Supports single mode fiber optic cabling.