Filter
Top Products
High Speed Interface Configuration Menu Screen (DLE2X-MA Only)
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-73
Figure 5-28 High Speed Interface Configuration Screen for the DLE2X-MA
The following briefly explains each field of the High Speed Interface
Configuration screen.
Port Type
(Read-Only)
Displays the name of the interface (DELFX-UI, DELTX-UI or
DELF3-UI) installed in ports 25 and 26. Figure 5-28 shows that there is
an DELTX-UI interface installed in port 25 and no interface, indicated by
Unknown, in Port 26.
Link Status
(Read-Only)
Indicates whether or not there is a physical connection from this port to
another 10BASE-F or 100BASE-TX/FX device. One of the following
values is displayed:
•Link – There is a link signal present and a valid physical connection
to another 10BASE-F or 100BASE-TX/FX device.
• No Link – There is no link signal present and there is no valid physical
connection to another device.
High Speed Interface Configuration
LKG-10858-98F
DELTX-UI
Link
100Base-TXFD
[Auto-Negotiation]
[100Base-TXFD] [Disabled]
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Module Type: DLE22-MA
Slot Number: X
Port 25
Unknown
No Link
[N/A]
[N/A]
[N/A]
Port 26
Port Type
Link Status
Current Oper. Mode
Desired Oper. Mode
Advertised Ability
MS 700 LOCAL MANAGEMENT
Event Message Line
SAVE EXIT
RETURN