Filter
Top Products
Flash Download Screen
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-79
Reboot After Download (Modifiable when RUNTIME is chosen only)
This field notifies the user that the DLE2X-MA and DLE3X-MA will
reboot after the download is complete. If a RUNTIME Download is
performed, this field toggles between YES and NO. If YES is selected,
the module reboots after the download is completed. If NO is selected the
module continues using the existing the firmware image. The module
stores the new firmware image in FLASH memory. When the module or
DLM6C-AA chassis is reset, the module will boot from FLASH memory
using the new image.
TFTP Gateway IP Addr (Selectable)
This field shows the IP address of the TFTP gateway server defined in the
General Configuration screen in Section 5.15.4, Setting the TFTP
Gateway IP Address.
Last Image Server IP (Read-only)
This field shows the IP address of the server used for the previous FLASH
Download.
Last Image File Name (Read-only)
This field shows the complete path and file name of the last image
downloaded to FLASH.
If TFTP or RUNTIME is selected as the download method
(Figure 5-29), the following two additional fields appear:
Download Server IP (Selectable)
The IP address of the TFTP server to be used for the FLASH download is
entered in this field.
Download File Name (Selectable)
The complete TFTP Server path and file name of the new image is entered
in this field.