Cabletron Systems DLE32-MA Switch User Manual


 
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
DLE2X-MA and DLE3X-MA Local Management. It also explains how to
use the Local Management screens and commands.
5.1 OVERVIEW
Local Management for the DLE2X-MA and DLE3X-MA consists of a
series of management screens that allow the management of the module,
the attached segments and the DLM6C-AA chassis. The management
screens allow the user to perform the following tasks:
Manage any interface module in the chassis via a connection to a
single interface module.
Assign IP addresses and subnet masks to the DLE2X-MA,
DLE3X-MA and the DLM6C-AA chassis.
Control access to the DLE2X-MA, DLE3X-MA and the DLM6C-AA
chassis by establishing community names.
Download a new image of operating software.
Designate which Network Management Workstations receive SNMP
traps from the DLE2X-MA, DLE3X-MA and the DLM6C-AA
chassis.
Monitor the environmental status of the DLM6C-AA chassis.
View switch, interface, and RMON statistics.
Assign ports to operate in standard or full duplex mode.
Enable trunking of ports to perform load sharing.
The Local Management screens shown in this chapter are for
the DLE22-MA. The DLE32-MA, DLE33-MA and DLE23-MA
share most of the following Local Management screens. All
Local Management functions specific to any of the interface
modules are preceded by a Note to alert the reader.