Filter
Top Products
Using the RESET Button
DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide 4-7
4.4 USING THE RESET BUTTON
The RESET button located near the upper plastic locking tab of the
module (refer to Figure 4-3) resets the DLE2X-MA and DLE3X-MA
processor without affecting the NVRAM.
Figure 4-3 RESET Button
To reset the DLE2X-MA and DLE3X-MA processor, press and release
the RESET button. The module processor goes through a reset process of
approximately 20 seconds. Additional module downtime may be added as
the module reenters the network.
!
Pressing the RESET button resets the device, and all current
switching being performed by the device is halted. A module
downtime of up to two minutes will result from this action.
DLE32-MA
Ethernet
Reset Button