Canon 1630 Copier User Manual


 
List of LCD Display Messages
The following messages are displayed in the LCD when the machine performs a
function or if it encounters an error. This section describes the general messages
and those related to copy functions. For the messages related to fax functions,
see Chapter 8, “Troubleshooting,” in the Facsimile Guide.
CHANGE DOCUMENT
When collating copies or making a 2 on 1 copy of documents using the platen glass,
you pressed [Start] before replacing a document.
Replace the document
press [Start].
CHECK DOCUMENT
OPEN THE ADF
There is a paper jam in the ADF.
Remove the document you are trying to copy or send from the ADF. (See “Removing
Jammed Paper from the ADF,” on p. 6-6.)
Make sure that the document is not too long or too short. (See “Acceptable Originals,”
on p. 2-2.)
CHECK PRINTER
An abnormality has occurred in the printer.
Disconnect the machine from the power supply and wait for 10 minutes, then
reconnect it. If the message remains, disconnect the machine and call your local
authorized Canon dealer.
CHECK TONER/DRUM CRG
The toner or drum cartridge is not installed.
Install the toner or drum cartridge correctly.
Remedy
Cause
Remedy
Cause
Remedy
Cause
Remedy
Cause
List of LCD Display Messages 6-9
6
Troubleshooting
***RG_Chap 06 3/4/04 7:47 PM Page 9