Canon FAX-JX210P Fax Machine User Manual


 
51Routine Maintenance
z Setting Automatic Printing
When the ink is low, you can set the receiving fax either automatic printing or storing in memory.
1 Press [Menu].
2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3 Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD
displays <ECM RX>.
4 Use [{] or [}] to select <OPTION SETTINGS>, then press [Start/Copy]. The LCD
displays <OFF>.
z To disable ink low automatic printing, use [{] or [}] to select <OFF>.
z To enable automatic printing, use [{] or [}] to select <ON>.
5 Press [Start/Copy].
6 Press [Stop/Reset].
The fax returns to standby mode.
What is a Low Ink Warning?
The machine counts the amount of ink used and when the remaining level reaches a preset level
the Low Ink Warning lamp beside the LCD display lights up to advise you that the FINE Cartridge
is running out of ink.
z When <RECOMEND NEW CRT>, or <NO INK> appears on the LCD.
The ink level of the FINE Cartridge showing <RECOMEND NEW CRT> is low. The ink level
of the FINE Cartridge showing <NO INK> is empty. You should ensure you have a new FINE
Cartridge.
z When <INK VOL UNKNOWN> appears on the LCD.
If you install the FINE Cartridge that was once empty, <INK VOL UNKNOWN> appears in the
LCD. The function for detecting the remaining ink level will be disabled since the ink level
cannot be correctly detected.
If you want to continue printing without this function, press [Stop/Reset] for at least 5 seconds.
Note
z The resulting print quality may not be satisfactory, if printing is continued under this condition.
z When the ink level is low, the print quality may become poor, and the machine will start storing
incoming fax data in the memory.
z The FAX cannot detect whether or not the received data are clearly printed on the paper.
z The FAX automatically deletes the received fax data in the memory after printing them. We
recommend you to set <SAVE RX IMAGE> to <ON> (see page 46). You can store the received
fax data in the memory for no more than 30 transactions. Delete them before the memory
becomes full.
RECOMEND NEW CRT
]
NO INK
INK VOL UNKNOWN