Filter
Top Products
147Summary of SettingsChapter 14
Summary of Settings
RX (Reception) SETTINGS Menu
For details on accessing the settings below, see p. 143.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting Description SubSettings
ECM RX Enables/disables Error Correction Mode (ECM) during
reception.
ON
OFF
RX MODE Selects the receive mode ( Chapter 8).
If you select
FAX/TEL AUTO SW
, you can select
additional subsettings ( p. 84).
FAX ONLY MODE
NET SWITCH*
FAX/TEL AUTO SW
INCOMING RING
When the
RX MODE
setting is set to
FAX ONLY
MODE
or
FAX/TEL AUTO SW
, this setting enables/
disables ringing when the FAX receives a call.**
OFF
ON
RING COUNT Selects the number of rings before the FAX begins
receiving.
2 TIMES
(1 to 99)
MAN/AUTO SWITCH
When the receive mode is set to
MANUAL MODE
, this
setting determines if the FAX switches to fax receive
mode after it rings for a specified time.
OFF
ON
F/T RING TIME
If you select
ON
above, this setting selects the length of
time the FAX rings before switching to fax receive mode.
15 SEC
(1 to 99)
REMOTE RX Enables/disables remote receiving. ON
OFF
REMOTE RX ID
If you select
ON
above, this setting selects the remote
receiving ID.
25
(00 to 99)
MEMORY RX Enables/disables reception of a document in the FAX’s
memory when a problem occurs during reception.
ON
OFF
RX PAGE FOOTER Enables/disables printing of the reception date and time,
page number, and transaction number (TX/RX NO.) at the
bottom of each received fax page.
OFF
ON
* This setting is available for certain countries only.
** Even if you have set
INCOMING RING
to
ON
, ringing will only occur if you have connected the optional
handset or a telephone to your unit.