Filter
Top Products
216 Setting Up Chapter 2
Follow this procedure to load a stack (maximum 10 mm stack height) of A4size plain
paper in the multipurpose tray:
Your FAX is now ready to print.
Testing the FAX
Once you have assembled the FAX, installed the toner cartridge, and loaded paper,
you can make sure the FAX is printing properly by making several copies of a
document ( p. 102). If you have problems in printing, see Chapter 13.
1 Remove the multipurpose tray cover
from the FAX. Prepare a stack of paper
by tapping it on a flat surface to even its
edges.
2 Open the paper guides to the
approximate width of the stack.
3 Insert the stack into the multipurpose
tray ~ (print side facing you and top
edge first), then adjust the paper guides
to the width of the paper Ä.
• Make sure there are no gaps
between the paper guides and the
paper stack.
4 Replace the multipurpose tray cover.
• Be sure to replace this cover to prevent dust accumulating inside the unit.
5 Adjust the paper delivery selector if necessary ( p. 54).
1
2
2