Filter
Top Products
83Receiving FaxesChapter 8
Receiving Faxes
If
FAX ONLY MODE
does not appear in the LCD when you press Receive Mode,
follow this procedure to set this mode:
The FAX treats all incoming calls as fax calls. It receives faxes automatically and
disconnects any voice calls.
1 Press Function.
2 Press Data Registration.
3 Press OK.
4 Use or to select
RX SETTINGS
.
5 Press OK.
6 Use or to select
RX MODE
.
7 Press OK.
8 Use or to select
FAX ONLY MODE
.
9 Press OK.
10 Press Stop to return to standby mode.
11 Confirm that FaxOnly is displayed in the
LCD.
• If FaxOnly is not displayed, follow
steps 1 to 2 on page 82 to select
FAX
ONLY MODE
. After a few seconds, the
LCD returns to standby mode.
The FAX does not ring when it receives a fax call. If you want to be alerted when a
fax call is received, connect the optional handset or a telephone to the FAX, and
enable the
INCOMING RING
setting ( p. 147). You can also select the number of
rings before the FAX answers (
RING COUNT
, p. 147).
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
FAX/TEL AUTO SW
Ex:
FAX ONLY MODE
INCOMING RING
15:00 FaxOnly
Ex:
15:00 FaxOnly
Ex: