Filter
Top Products
Cause Corrective Action
A print job for printing on
sheets was sent when a roll
is loaded.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have specified
in the printer driver.
(See "Removing the Roll from the Printer.") ➔P.18
(See "Loading and Printing on Sheets.") ➔User's Guide
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
Paper jam
Paper jam
Cause Corrective Action
A paper jam oc-
curred in the
printer during
printing.
For roll paper, cut the paper on the upper side of the {Paper Feed Slot.
1.
Push the Release Lever back and remove the jammed paper.
(See "Clearing Jammed Roll Paper.") ➔P.84
(See "Clearing a Jammed Sheet.") ➔P.87
2.
Load the paper.
(See "Loading Rolls in the Printer.")
➔P.15
(See "Loading Sheets in the Printer.")
➔P.21
3.
Pull the Release Lever forward.
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.
Paper is crooked.
Paper is crooked.
Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced.
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it parallel to the
orange Paper Alignment Line.
3.
Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
➔P.15
If this error recurs after you reload the roll, remove the Roll
Holder from the printer, push the roll firmly in until it touches
the Roll Holder flange, and reload the Roll Holder in the print-
er.
(See "Attaching the Roll Holder to Rolls.") ➔P.12
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.") ➔P.21
Important
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be-
cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.
iPF780 Series
Paper jam
Basic Guide
Error Message Messages regarding paper
117