Filter
Top Products
7-15
Sending FaxesChapter 7
Sending Faxes
7
Enter up to 125 fax numbers you want to send
to using any of the following methods:
❏
One-touch speed dialling:
Press the one-touch speed dialling
button(s) you want.
❏
Coded speed dialling:
Press
Coded Dial
, then use the numeric
buttons to enter the two-digit code you
want. Repeat for other codes.
•
Be sure to press
Coded Dial
before
each code.
❏
Regular dialling:
Use the numeric buttons to enter the fax
number you want, then press
Set
.
•
You can only enter one fax number
this way.
Note
•
If you enter the wrong destination, press
Clear
, then enter the correct destination.
•
When you have entered multiple fax numbers, use
▼
or
▲
to scroll through the
numbers to review the destinations.
8
Press
Start/Copy
to begin scanning the
document into the FAX’s memory.
•
When the preset time is reached, the FAX
sends the document to the destination(s)
you specified in step 7.
Note
•
You can register up to 20 different delayed sending operations.
•
If the FAX’s memory becomes full while scanning your document, MEMORY FULL
will appear in the LCD. If this happens, you will not be able to send the document at
a preset time. Remove the remainder of the document from the ADF (you may need
to open the operation panel to do so).
•
Since the FAX is multitasking, you can perform other tasks even when your FAX is
set for delayed sending.
Ex:
Ex:
Ex:
Ex: