Filter
Top Products
14-7
Summary of SettingsChapter 14
Summary of Settings
RX (Reception) SETTINGS Menu
For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
Description
Sub-Settings
Enables/disables Error Correction Mode (ECM) during
reception.
Selects the receive mode (
Chapter 8).
If you select
, you can select
additional sub-settings (
p. 8-5).
When the
setting is set to
or
, this setting enables/disables ringing
when the FAX receives a call.**
Selects the number of rings before the FAX begins
receiving.
to
When the receive mode is set to
, this
setting determines if the FAX switches to fax receive
mode after it rings for a specified time.
If you select
above, this setting selects the length of
time the FAX rings before switching to fax receive mode.
to
Enables/disables remote receiving.
If you select
above, this setting selects the remote
receiving ID.
to
Enables/disables reception of a document in the FAX’s
memory when a problem occurs during reception.
Enables/disables printing of the reception date and time,
page number, and transaction number (TX/RX NO.) at the
bottom of each received fax page.
*
This setting is available for certain countries only.
**
Even if you have set
to
, ringing will only occur if you have connected the optional
handset or a telephone to your unit.