Filter
Top Products
Miscellaneous Problems
6-37
Troubleshooting
6
CD-ROM Setup does not appear automatically. (Windows 98/Me/Vista only)
Cause CD-ROM Setup is not specified to appear automatically.
Remedy For Windows 98/Me: Display the properties for the CD-ROM drive from [Device
Manager] and select [Auto insert notification] in the [Settings] sheet.
For Windows Vista: From [Control Panel], click [Play CDs or other media
automatically], select the [Use AutoPlay for all media and devices] check box,
and then set [Software and games] to [Install or run program].
The message [Specified Paper Incorrect] appears in the Printer Status Window.
Cause 1 The [Output Size] setting of the current print job is different from the [Output
Size] setting of the previous job.
Remedy To print on the paper currently loaded in the printer, click [ ] (Error
Recovery) in the Printer Status Window. To print on different paper than the
paper currently loaded in the printer, reload the new paper then click [ ]
(Error Recovery) in the Printer Status Window.
Cause 2 [Detect Paper Size in Multi-purpose Tray] is selected.
Remedy If you clear the checkmark from the [Detect Paper Size in Multi-purpose Tray]
checkbox, printing continues on the paper that is currently loaded in the printer
without displaying a message, regardless of the [Output Size] setting.
You can adjust the [Detect Paper Size in Multi-purpose Tray] setting in the
[Finishing Details] dialog box by clicking [Finishing Details] in the [Finishing]
sheet.
If you are using the printer sharing function on your computer, it takes a long time for the
Printer Status Window to obtain the printer status.
Cause If you are using Windows XP Service Pack 2 or another operating system
equipped with Windows Firewall as a print server, communication with the client
computers is blocked by Windows Firewall.
Remedy Start the print server and configure Windows Firewall to unblock
communications with the client computers. (See "Windows Firewall," on p. 7-8)