Filter
Top Products
When a Message Is Displayed
73
Cause:
The paper type specified cannot be
printed.
Remedy:
Press [
] and the paper will
be printed as plain paper. If the
paper is not plain paper, the data
may not be printed properly.
Cause:
An error occurred when data was
being transferred between a PC and
the printer.
Remedy:
Check the interface cable connection
and print the data again.
Cause:
The sizes of the paper loaded in the
paper cassette and paper tray are
different to the paper size settings
specified on the PC or the control
panel.
Remedy:
When paper is being fed from the
paper cassette, make sure that the
size of the paper loaded in the paper
cassette is the same as the paper
size settings for the paper cassette.
Also when paper is being fed from
the paper tray, make sure that the
size of the paper loaded in the paper
tray is the same as the paper size
settings for the paper tray before you
press [
].
Cause:
The paper guides of the cassette 1 is
out of position.
Remedy:
Set the paper guides to the size of
the paper loaded in the cassette 1.
Cause:
The type of the paper fed from the
paper cassette or paper tray is
different to the paper type setting.
Remedy:
Press
] to cancel the print
job. Correct the paper type setting or
load the paper of the type specified
in the paper type setting into the
paper cassette or paper tray.
Cause:
The cartridge has been installed in
the wrong position.
Remedy:
Remove the cartridge indicated on
the display from the printer, and then
re-install it in the correct position.